Fujitsu D2530 technical manual Kbpwr, Biosrec

Features			Connectors and jumpers
7	= CPU2 fan	21	= LPT1
8	= RAID key	22	= VGA_EN (jumper)
9	= SATA 1 - 6	23	= CLRTC (jumper)
10	= USB 7/8	24	= LAN_EN (jumper)
11	= IDE primary	25	= LAN_BW (jumper)
12	= HDLED	26	= rear fan
13	= intrusion	27	= external connectors
14	= front panel	A = 5V Standby LED

Settings with jumpers

The system board is supplied with all jumpers set on default position (pin 1-2).

KBPWR (1)

1-2 PS/2 keyboard/mouse powered by 5V (default)

2-3 PS/2 keyboard/mouse powered by 5V Standby

USBPW 1/2 (2) and USBPW 3/4 (15)

1-2 USB device powered by 5V (default)

2-3 USB device powered by 5V Standby

BIOSREC (19)

1-2 system BIOS (default)

2-3 recover system BIOS (Flash BIOS, Recovery Diskette required)

VGA_EN (22)

1-2 onboard VGA enabled (default)

2-3 onboard VGA disabled (PCI VGA graphics controller)

CLRTC (23)

1-2 CMOS/RTC settings are not cleared (default)

2-3 clear CMOS/RTC settings

D2530 (Econel 200 S2) Technical Manual 21