Features | Interfaces and connectors |
LAN connectors
This system board is populated with two Dual Gigabit LAN controllers Broadcom 5715 and a service LAN controller. The Gigabit LAN controller supports the transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The LAN controller supports WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here Intel PXE is supported.
The service LAN port serves as management interface and is prepared for RemoteView.
The Gigabit LAN controller has two LAN connectors. The LAN connectors are equipped with two LEDs (light emitting diode) indicating the transfer rate and the activity.
1 |
|
|
|
|
|
|
|
|
| 2 |
1 |
|
|
|
|
|
|
|
| 2 |
|
|
|
|
|
|
|
|
Figure 7: LAN connector |
|
| |
1 | LAN link/activity green | on | LAN connection |
|
| off | no LAN connection |
|
| flashing | LAN transfer |
2 | LAN transfer rate | off | transfer rate 10 Mbit/s (or no |
|
|
| connection) |
| green | on | transfer rate 100 Mbit/s |
| yellow | on | transfer rate 1000 Mbit/s |
D2542 (RX100 S5) | Technical Manual | 25 |
