Settings with jumpers, JP8 Boot Block | Fujitsu D2542 instruction

Settings with jumpers

Features

3.8Settings with jumpers

The system board is supplied with all jumpers set on the following positions.

JP8

JP5

Figure 8: Jumper default settings

JP8 - Boot Block

1-2 Normal boot (default)

2-3 BIOS recovery

JP5 - Password Skip

1-2 Disable (default)

2-3 Enable

26

Technical Manual

D2542 (RX100 S5)

Image 26

Fujitsu D2542 technical manual Settings with jumpers, JP8 Boot Block, JP5 Password Skip

Contents

System Board D2542 for RX100 S5 Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISO Contents Page Introduction Notational conventionsPage Important notes Batteries ESD label CE Certificate CE Certificate Environmentally friendly product design and development Environmental ProtectionImportant notes Environmental Protection Returning, recycling and disposal Processors FeaturesOverview Main memory Overview External connectorsInternal connectors CSS Customer Self Service FeaturesBios features Form factor TPM Option Population of the memory Basic Main memoryModule population PCI slots PCI busPCI bus Screen resolution Temperature / system monitoring Voltage monitoring Temperature / system monitoringSensor monitoring System Event Log SEL LEDs LEDs Indicator Meaning LED Interfaces and connectors Schematic view of the system board D2542 Interfaces and connectors External ports LAN connectors LAN connector LAN link/activity green JP8 Boot Block Settings with jumpersSettings with jumpers JP5 Password Skip Replacing the lithium battery Replacing the lithium batteryPage Abbreviations Abkürzungen IRMC Nvram RAM WfM