Secondary Master Submenu of the Main Menu

L i f e B o o k E S e r i e s B I O S

The Secondary Master submenu allows you to configure secondary ATA devices.

PhoenixBIOS Setup Utility

Main


Secondary Master [UJDA750FDVD/CDRW-(SM)]		Item Specific Help

Type:	[Auto]	Select ATA/ATAPI drive
		installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
Transfer Mode:	[Standard]	The BIOS auto-types the
Ultra DMA Mode:	[Disabled]	drive on boot time.
		Except [Auto]
		You enter parameters of
		the drive.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F10 Save and Exit

Figure 3. Secondary Master Submenu

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field	Options		Default	Description


Type:	■	Auto	[Auto]	NOTE: The Type field does not appear as a drop-down menu. Tap
	■	None		the spacebar to cycle through the selections.
	■	CD-ROM		Selects the ATA/ATAPI device type. Select Auto to have the type
	■	Hard Disk
				automatically identified by the BIOS at POST. If None is selected, all
				of the following setup items do not appear. Select CD-ROM or Hard
				Disk for appropriate drive type installed at this connection.

CHS Format				Cylinders/Heads/Sectors

Cylinders:	■	A number between	–—	This item appears only when Hard Disk is selected as the type. This
		0 and 65,535		field is changed by incrementing (pressing the [Spacebar]) or by typ-
				ing in the number.

Heads:	■	A number between	–—	This item appears only when Hard Disk is selected as type. You can
		1 and 16		change the value by incrementing (pressing the [Spacebar]) or by
				typing in the number.

Sectors:	■	A number between	–—	This item appears only when Hard Disk is selected as type. You can
		0 and 63		change the value by incrementing (pressing the [Spacebar]) or by
				typing in the number.