E8110.book Page 44 Tuesday, February 28, 2006 2:59 PM

L i f e B o o k E 8 0 0 0 N o t e b o o k

Memory Upgrade Module

Your Fujitsu LifeBook notebook comes with a minimum of 256 MB of high speed Double Data Rate Synchronous Dynamic RAM (DDR2-667 SDRAM) factory installed. To increase your notebook’s memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in-line (DIMM) SDRAM module. To ensure 100% compatibility, purchase the SDRAM module only from the Fujitsu web store at www.shopfujitsu.com.

Do not remove any screws from the memory upgrade module compartment except the ones specifically shown in the directions for installing and removing the memory upgrade module.

The memory upgrade module can be severely damaged by electrostatic dis- charge (ESD). To minimize risk to the module, observe the following precau- tions:

Before handling a memory module, touch a grounded metal object to discharge static electricity built up in your body.

When installing or removing a memory module, hold it by the edge so as not to touch any contacts or chips. Be careful not to touch any internal computer terminals or components; the oil from your fingers could cause a short to the components.

Be sure to power down your system before adding or removing memory modules. Even if the system is in hibernate or standby states, data could be lost or the memory could be damaged if power is still available to the system.

INSTALLING MEMORY UPGRADE MODULES

1.Turn off power to your notebook, remove any power adapter (AC or auto/airline). Remove the battery.

2.Make sure that all the connector covers are closed.

3.Turn the notebook bottom side up, and remove the screws from the memory upgrade module compart- ment. (Figure 4-9)

4.Remove the cover.

44

Figure 4-9. Opening the Memory Upgrade Compartment

5.Remove the memory upgrade module from the static guarded sleeve.

6.Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment.

7.Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You will hear a click when it is prop- erly in place. (Figure 4-10)

Figure 4-10. Installing a Second Memory Module

8. Replace the cover and reinstall the screws.

The memory upgrade module is not something you routinely remove from your notebook. Once it is installed, you can leave it in place unless you want to change system memory capacity.

REMOVING A MEMORY UPGRADE MODULE

1.Perform steps 1 through 4 of Installing a Memory Upgrade Module.

2.Pull the clips sideways away from each side of the memory upgrade module at the same time.

3.While holding the clips out, remove the module from the slot by lifting it up and pulling towards the rear of your notebook. (Figure 4-11)

Page 54
Image 54
Fujitsu E8110 manual Installing Memory Upgrade Modules, Removing a Memory Upgrade Module

E8110 specifications

The Fujitsu E8110 is a versatile and robust business laptop designed to meet the demands of modern enterprises. It is part of Fujitsu's Lifebook series, known for their reliability, portability, and performance. With a sleek design and a focus on functionality, the E8110 caters to professionals who require a dependable device for daily tasks.

One of the standout features of the E8110 is its powerful Intel Core processor, which provides ample computing power for multitasking and demanding applications. The laptop supports various configurations, allowing users to choose from different processor options to best suit their work requirements. This flexibility ensures that users can find a configuration that balances performance and cost-effectiveness.

The E8110 also boasts a generous amount of RAM and storage options, enabling users to run multiple applications simultaneously without experiencing slowdowns. With support for solid-state drives (SSD), users benefit from faster boot times and improved data access speeds, which can significantly enhance productivity.

In terms of display, the E8110 features a sharp and vibrant screen that provides excellent visibility in various lighting conditions. The display also supports a wide viewing angle, making it easier for teams to collaborate on projects while sharing the screen.

Security is a paramount consideration for business users, and the Fujitsu E8110 addresses this with multiple security features. The laptop includes a biometric fingerprint scanner and smart card reader, which help safeguard sensitive information and prevent unauthorized access. Additionally, Fujitsu’s software solutions offer robust data protection measures, including encryption and secure boot options.

The E8110 is designed with connectivity in mind, offering a range of ports including USB 3.0, HDMI, and even a legacy VGA port for compatibility with older projectors and displays. This versatility allows users to connect to various peripherals and external devices effortlessly.

Moreover, portability is a key characteristic of the E8110. Weighing in at just a few pounds, it is lightweight enough to carry around without causing fatigue, making it an ideal choice for professionals who travel frequently.

In summary, the Fujitsu E8110 combines powerful performance, security features, and portability, making it a strong contender in the business laptop market. Its thoughtful design and focus on user needs make it an excellent choice for professionals seeking a reliable and efficient computing solution.