FBR211 SERIES
nSPECIFICATIONS
|
| Item |
| Standard (A or B type) |
|
| High sensitive (C or E type) | ||
Contact | Arrangement |
| 1 form C (SPDT) |
|
|
| |||
|
| Material |
| ||||||
|
| Resistance (initial) | Maximum 100 mΩ (at 0.1 A 6 VDC) |
| |||||
|
| Rating (resistive) | 0.5 A 120 VAC or 1 A 28 VDC |
|
|
| |||
|
| Maximum Carrying Current | 2 A |
|
|
| |||
|
| Maximum Switching Power | 60 VA or 28 W |
|
|
| |||
|
| Max. Switching Voltage*1 | 220 VAC or 150 VDC |
|
|
| |||
|
| Maximum Switching Current | 1.25 A (AC) or 2 A (DC) |
|
|
| |||
|
| Minimum Switching load*2 | Plastic sealed 1 mA, 1V |
|
|
| |||
|
| (reference) |
| Flux free 1 mA, 5V |
|
|
| ||
Coil | Nominal Power (at 20°C) | Approximately 450 mW |
|
| Approximately 200 mW | ||||
|
| Operate Power (at 20°C) | Approximately 315 mW maximum |
|
| Approximately 140 mW maximum | |||
|
| Operating Temperature |
|
| |||||
|
| Operating Humidity | 45 to 85%RH |
|
|
| |||
Time Value | Operate (at nominal voltage) | Maximum 5 ms |
|
|
| ||||
|
| Release (at nominal voltage) | Maximum 5 ms |
|
|
| |||
Life | Mechanical |
| 5 × 106 operations minimum |
|
|
| |||
|
| Electrical |
| 3 × 105 operations minimum (at | 1 A/ | 28 VDC resistive load) | |||
|
| (Refer to the REFERENCE DATA) | 1 × 105 operations minimum (at | 2 A/ | 12 VDC resistive load) | ||||
|
|
|
|
|
| 1 × 105 operations minimum (at 0.5 A/120 VDC resistive load) | |||
Other | Vibration Resistance | 10 to 55 Hz (double amplitude of 1.5 mm) | |||||||
|
| Shock |
| Misoperation | 100 m/s2 (11±1 ms) |
|
| 60 m/s2 (11±1 ms) | |
|
| Resistance |
|
|
|
|
|
|
|
|
|
| Endurance | 1,000 m/s2 (11±1 ms) |
|
|
| ||
|
|
|
|
|
|
|
| ||
|
| Weight |
| Approximately 4 g |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
*1 | If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type | ||||||||
| of load. |
|
|
|
|
|
|
|
|
*2 | Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum | ||||||||
| switching load varies with the switching frequency and operation environment. |
|
|
| |||||
nINSULATION
Item | Standard (A or B) | High sensitive (C or E) | |
Isolation (initial) | Minimum 100 MΩ (at 500VDC) |
| |
Dielectric |
| 500VAC 1 min. (standard) |
|
Strength |
| 1,500VAC 1 min. (high isolation coil and contact) | |
nSAFETY STANDARDS
Type | Compliance | Contact rating |
UL | UL 110 | Flammability: UL |
| E63615 | 0.5A, 120VAC (resistive) |
|
| 1A, 28VDC (resistive) |
CSA | C22.2 No. 14 | |
| LR 40304, LR 46016 |
|
