Fujitsu fi-4640S manual Description Selectable Default Parameters

				(Continued)
No	Item	Description	Selectable	Default
			parameters
13	Select Interface	Selects the interface when the scanner has	Auto/SCSI/TPS	Auto
		a board in the Third Party Slot.
14	Display TPS Board	Displays the ID number of the board which	---	---
	ID Number	is installed in the Third Party Slot.
		When the IPC-4D image processing board
15	IPC mode	is installed in the third party Slot, select this	Scanner/IPC4D	Scanner
		IPC-4D board or the image processing
		circuit built in the scanner.
			Left/Right:	Left/Right:
		Adjusts the edge areas to be erased from	0 to 15 mm	0 mm
			Top:	Top:
16	ADF Edge Erasing	the image scanned by the automatic
			0 to 15 mm	0 mm
		document feeder (ADF).
			Bottom:	Bottom:
			-7 to +7 mm	0 mm
			Left/Right:	Left/Right:
			0 to 15 mm	0 mm
17	FB Edge Erasing	Adjusts the edge areas to be erased from	Top:	Top:
		the image scanned by the flat bed (FB).	0 to 15 mm	0 mm
			Bottom:	Bottom:
			0 to 15 mm	0 mm
18	Ink Remain	Resets the ink remain counterr.	Reset/No	No
19	Numbering Print	Enables or disables the numbering counter	On/Off	Off
		when the fi-475PR Imprinter is installed.

*This offset refers to the difference from the value adjusted by automatic offset adjustment.

**Some restrictions apply to the detection of a double feed.

7-3