![](/images/new-backgrounds/1194850/194850159x1.webp)
16. Adjust ADF Erasing Edges
<Screen 56>
1Press “Next” or “Previous”
and let the
scanner display Screen 56.
2 At Screen 56, press or
to select “Yes”
and press . Then the scanner displays Screen
<Screen
3At Screen
settings to the factory default or select “No” to make new settings (as shown below).
Then press . The scanner displays Screen
<Screen
4At Screen or
to change the
top setting. The value changes in 1 mm
units. Then press to activate the setting. The scanner displays Screen
<Screen
5At Screen or
to change the
bottom setting. With (+:Up), the area is set upward from the bottom edge of the image. With
changes in 1 mm units. Then press to activate the setting. The scanner displays Screen
<Screen
6At Screen or
to change the
left setting. The value changes in 1 mm
units. Then press to activate the setting. The scanner displays Screen
<Screen
7At Screen or
to change the
top setting. The value changes in 1 mm
units. Then press to activate the setting. The scanner displays the next setup item.