9. Select the [Scan] menu J [Select Scanner].D The [Select Scanner] dialog box appears.10.Select the scanner you want to use, and then click the [Select] button.Select the scanner model which is connected to your computer.

The list of scanner models varies depending on the scanner driver installed. If the connec- tion is via SCSI/USB Connector 2, select [Kofax VRS Scanner].

TWAINISIS/VRS

TWAIN

ISIS

Kofax VRS

FUJITSUFujitsu

Kofax VRS

fi-6800dj

fi-6800

Scanner

 

 

 

If [Kofax VRS Scanner] does not appear in the list, check if the interface cable is properly connected to SCSI/USB Connector 2.

If [Kofax VRS Scanner] does not appear even after you have connected the cable properly, refer to "Chapter 8 Troubleshooting" in the Operator's Guide.

When using Kofax VRS for the first time, the [Register Kofax VRS] screen appears. User registration is required to obtain support information from Kofax as well as to upgrade the software, though Kofax VRS can still be used without user registration. To register later, select [Start] menu J [All Programs] J [Kofax VRS] J [Kofax VRS Administration Console], and follow the on-screen instructions. For details, refer to the Kofax VRS Installation Guide (PDF) which is included in the Setup DVD-ROM (\VRS\HVRS\HVRS\Documentation).

11. Click the [Scan] menu J [Scan Settings].DThe [Scan Settings] dialog box appears.
12. Clear the [Save to file] check box.You only check the operation now, so you do not have to save to file.13. Click the [Scanner Setting] button.DThe scanner driver's setup dialog box appears.14.Configure scanner settings such as the resolution and paper size.zTWAIN/ISIS/Kofax VRS scanner driversConfigure scan settings, and then click the [OK] button.

For a TWAIN scanner driver, the scanner driver setup dialog box may be displayed again after the [OK] button is clicked. If this occurs, click the [Scan] button in the dialog box.

15. In the [Scan Settings] dialog box, click the [Scan] button.

DThe scanned document images are displayed in the ScandAll PRO window.

Refer to "Chapter 8 Troubleshooting" in the Operator's Guide, if you see any unexpected characters on the LCD.

For information about other scanning features, refer to "Chapter 5 Various Ways to Scan" in the Operator's Guide.

7