FMWCC39
Harsh Environment Case
User’s Instructions
Stylistic LT
These instructions provide details on using the FMWCC39 harsh environment case (HEC). The HEC provides added protection for your Stylistic LT when it is being used, transported, or stored. Note the following when using the harsh environment case:
•To avoid overheating, suspend the pen tablet when charging the battery pack while the pen tablet is in the case.
•To prevent scratches, a screen protector should be installed on the display window of the HEC. Two screen protectors are provided with the HEC. Additional screen protectors can be obtained using order number FMWSP8
•If your Stylistic LT will be used both with and without the HEC, any screen protector on the pen tablet can be left in place. However, if the pen tablet will be used only in the HEC, any screen protector on the pen tablet should be removed for better viewing.
•If you use a pen tether, attach it to one of the
Installing the Pen Tablet in the Case
Pull up the Velcro® flap, unzip the HEC, and lay it open flat, as shown in Figure 1.
HEC Screen
Position the Stylistic LT over the ventilation mesh as shown in Figure 2. Zip the wraparound zipper and resecure the Velcro® flap.
Figure 2. Stylistic LT in HEC
Once the system is installed in the HEC, you can either store the pen in the system pen holder or it can be stored in the pen holder at the top of the HEC, as shown in Figure 3.
Pen Holder
Figure 3. Enclosed Stylistic LT
Installing a Screen Protector
1.To ensure good adhesion, clean the exterior surface of the HEC window with a soft cotton cloth dampened with denatured alcohol before installing the screen protector.
Velcro® Flap
Ventilation Mesh
Note: Using denatured alcohol to clean the window may result in streaking when it dries. If streaking occurs,
Figure 1. Empty Stylistic LT HEC
gently buff the surface with a clean, soft cloth.
Stylistic LT is a trademark of Fujitsu Personal Systems, Inc. © 1999 Fujitsu Personal Systems, Inc.
6/99 |