Fujitsu FTP-607 Series manual Part numbers, Specifications

FTP-627MCL401/601

npart numbers

			Part Number
Easy Load Model with low profile cutter			FTP-627MCL401
			FTP-627MCL601
LSI for driving		MCL401	FTP-627CU301R
		MCL601	FTP-627CU601R
Interface	Cutter	MCL401	FTP-627DSL291R Parallel (Centronics) /Serial (RS-232C)
board for	supported
		MCL401	FTP-627DSL603R USB (V1.1)
Mech/Cutter
			FTP-627DSL605R Serial (RS-232C)
		MCL601	FTP-627DSL613 R USB (V1.1)
			FTP-627DSL615 R Serial (RS-232C)
Interface	Parallel (Centronics)		FTP-628Y202
cables
	Serial (RS232C)		FTP-628Y302
	USB		FTP-629Y301
Power	Logic		FTP-629Y401
cables
	Head, motor		FTP-629Y601

nspecifications

Item					Specifications
Part number		FTP-627MCL401/601
Printing method		Thermal-line dot method
Dot structure		432 dots/line
Dot pitch (Horizontal)		0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)		0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area		54 mm
Number of columns		ANK 36 columns/line
		(maximum 12/24 dot font)
Paper width		58 mm
Paper thickness		60 to 85 µm (some paper in this range may not be
		used because of paper characteristics)
Printing Speed	MCL401	Maximum 100mm/sec. (800 dot line/sec.)
	MCL601	Maximum 150mm/sec. (1,200 dot line/sec.)
Character types		Alphanumeric, kana:				159 types
		International characters:				195 types
		JIS Kanji (Kanji CG loaded board):				about 6800 types
Character, dimensions (W×H), number		2 × 24 dots, (1.5 × 3.0 mm), 36 columns: ANK
of columns		24	×	24 dots, (3.0 × 3.0 mm), 18 columns: ANK
		8	×	16 dots, (1.0	× 2.0 mm), 54 columns: ANK
		6	×	16 dots, (2.0	× 2.0 mm), 27 columns: ANK