Fujitsu FTP-607 Series manual Connector FPC specification CN3/CN10, FTP-627MCL401/601

FTP-627MCL401/601

FTP-627MCL401

1. Connector (FPC) specification (CN3/CN10)

(1) Connector
	Mechanical unit side:							FPC connector
	Remote side (housing site): 52610-2471 (made by Molex)
(2) Pin assignment on the mechanical side
	No			Signal			I/ O	Contents
	1	PHK					—	Photointerrupter (Cathode)
	2		VSEN				I	Ground power supply for paper sensor
	3	PHE					O	Photointerrupter (Emittor)
	4		VH				I	Head drive power
	5	DI					I	Data input
	6						I	Print enable signal 2
			STB2
	7						I	Print enable signal 3
				STB3
	8		VDD				I	Logic Power
	9	GND					—	Head ground
	10	GND					—	Head ground
	11	GND					—	Head ground
	12		TH				O	Thermistor
	13						I	Print enable signal 1
			STB1
	14						I	Data Latch
			LAT
	15	CLK					I	Clock
	16		VH				I	Head drive power
	17		VH				I	Head drive power
	18		SW				—	Platen open switch
	19		SW				—	Platen open switch
	20	MT A					I	Motor excite signal A
	21	MT				A	I	Motor excite signal	A
	22	MT B					I	Motor excite signal B
	23	MT			B		I	Motor excite signal	B
	24	NC					—	Not connected