Fujitsu FTP-607 Series manual Detected by photo-interruptor

FTP-627MCL401/601

nspecifications

Item			Specification
Iterface			Conforms to RS232C/Centronics / USB
Power supply	For print head	MCL401	24 VDC average current, 0.4A (0.9 A peak)
			(print ratio: 12.5%, print speed 100mm/sec.)
		MCL601	24 VDC average current 0.5 A (0.9 A peak)
	For motor	MCL401	24 VDC ±5%, 1 A maximum
		MCL601	24 VDC ±5%, 1.1 A maximum
	For cutter	MCL401	24 VDC ±5%, 1 A maximum
		MCL601	24 VDC ±5%, 1.3 A maximum
	For logic		3.3 to 5.25 VDC, 0.1 A maximum
Dimensions	Mechanism with cutter		81.2 x 42.2 x 21.8 mm (WxDxH)
	Interface	DSL291	70 x 60 x 12 mm (WxDxH)
	board
		DSL6xx	95 x 70 x 21.6 mm (WxDxH)
Weight	Mechanism with cutter		Approximately 100g
	Interface board		Approximately 50g
Life	Head	MCL401	Pulse durability: 50 million pulses/dot (print ratio: 25%).
		MCL601	Pulse durability: 100 million pulses/dot (print ratio: 25%).
		MCL401	Abrasion resistance: paper traveling distance 50km
		MCL601	Abrasion resistance: paper traveling distance 100km
	Cutter	MCL401	500,000 cuts
		MCL601	1,000,000 cuts
	Platen		5,000 times (open/close)
Operating	Operating temperature*		0ºC to +50ºC
environment
	Operating humidity		20 to 85% RH (no condensation)
	Storage temperature		-20ºC to +60ºC (paper not included)
	Storage humidity		5 to 95% RH (no condensation)
Detection	Head temperature		Detected by thermistor
function	detection
	Paper out/mark		Detected by photo-interruptor
	detection
	Platen release		Detected by sliding switch
Recommended thermal sensitive paper			High sensitive paper	TF50KS-E4 (Nippon paper)
			Standard paper	TF60KS-E (Nippon paper),
				FTP-020PU001 (58mm)
				PD150R (Oji paper)
				FTP-020PU701 (58mm)
			Medium life storage	TF60KS-F1 (Nippon paper)
			paper	FTP-020P0102 (58mm)
				PD170R (Oji paper)
				P220VBB-1 (Mitsubishi paper)
			Long life storage	PD160R (Oji paper)
			paper	AFP-235 (Mitsubishi paper)
				TP50KJ-R (Nippon paper)
				HA220AA (Nippon paper)

*+5˚C to +40˚C printing density assurance rance.