Fujitsu FTP-627USL631, FTP-627USL431 manual Mtbf

FTP-627USL431/631

nSPECIFICATIONS

Item		Specification
Part Number		FTP-627USL431/435	FTP-627USL631/635
Interface		Conforms to USB / Serial
	For print head	24 VDC average current, 0.5A (0.9A peak)
		(print ratio: 12.5%, print speed: 100mm/sec.)
Power
	For motor	24 VDC ±5%, 0.8 A maximum
supply
	For cutter	24 VDC ±5%, 1.1 A maximum
	for logic	5 VDC ±5%, 0.2 A maximum
Dimensions	Mechnism and board	101 x 114 x 139mm (WxDxH)
Weight	Mechnism and board	Approximately 600g
		Pulse resistance: 100 million pulses/dot (under out standard
	Head	conditions); Abrasion resistance: paper traveling distance
Life		50km (print ratio: 12.5% or less)	100km (print ratio: 12.5% or less)
	Cutter	500,000 cuts (20 cuts/minute)	1,000,000 cuts
	Platen	5,000 (open/close)
MTBF	Mechanism	3,000 hours
	Circuit board	500, 000 hours
	Operating temperature*	0˚C to 50˚C
Operating	Operating humidity	20 to 85% RH (no condensation)
environment	Storage temperature*	-20˚C to +60˚C (paper not included)
	Storage humidity	5 to 90% RH (no condensation)
	Head temperature	Detected by thermistor
Detection	detection
	Paper out /mark	Detected by photo-interuptor
function
	detection
	Platen release	Detected by sliding switch
		High Sensitive Paper	TF50KS-E4 (Nippon paper)
		Standard Paper	TF60KS (Nippon paper),
			FTP-020PU001 (58mm),
			PD105R (Oji paper),
			FTP-020P0701 (58mm)
Recommended thermal sensitive		Medium Life Paper	TF60KS-F1, FTP-020P0102
paper			(58mm), PD170R (Oji paper),
			P220VBB-1 (Mitsubishi paper)
		Long Life Paper	PD160R-N (Oji paper), AFB-235
			(Mitsubishi paper), TP50KJ-
			R (Nippon paper), HA220AA
			(Nippon paper)

*+5˚C to +40˚C printing density assurance rance.