Fujitsu FTP-628 Series manual FTP-628MCL Series, Part Numbers, Specifications, Design

FTP-628MCL Series

■PART NUMBERS

Item					Part Number
				FTP-628MCL001 (front paper insertion without head open detection switch
Printer mechanism				FTP-628MCL002 (bottom paper insertion without head open detection switch
				FTP-628MCL003 (front paper insertion with head open detection switch and knob)
				FTP-628MCL004 (bottom paper insertion with head open detection switch)
LSI for driving				FTP-628CU101
Interface		ANK only		FTP-628DSL001 (not yet available)
		Kanji
Board				FTP-628DSL102 Universal serial / Centronics with flash memory and Kanji
		supported
	NOT
■ SPECIFICATIONS
		Item			FOR	Specifications
Part number					FTP-628MCL001/002/003/004
Printing method					Thermal-line dot method
Dot structure			DESIGN
					384 dots/line
Dot pitch (Horizontal)						NEW
					0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)					0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area					48 mm
Number of columns					ANK 32 columns/line (maximum 12x 24 dot font)
Paper width					58 mm+0-1
Paper thickness					60 to 80 μ m (some paper in this range may not be used because of
					paper characteristics
Printing Speed					Maximum 60mm/sec. (480 dot line/sec.)
Character types					Alphanumeric, katakana:		159 types
					International and special characters:		195 types
					JIS Kanji level 1, level 2, non-Kanji
					(supported only by FTP-628DSL102):		about 6800 types
Character, dimensions (H×W), number of					12 × 24 dots, (1.5 × 3.0 mm), 32 columns: alphanumeric, katakana
columns					24 × 24 dots, (3.0 × 3.0 mm), 16 columns: alphanumeric, katakana, Kanji
					8 × 16 dots, (1.0 × 2.0 mm), 48 columns: alphanumeric, katakana
					16 × 16 dots, (2.0 × 2.0 mm), 24 columns: alphanumeric, katakana, Kanji

2