Fujitsu FTP-628 Series manual Function, Dimensions, Printer mechanism

FTP-628MCL Series

■FUNCTION

	Item		Item
1.	Test print function	8.	Cutter abnormality detection
2.	Paper out detection	9.	Motor power saving function
3.	Paper near end detection	10.	Mark detection function
4.	Head up detection	11.	MCU operation abnormality detection
5.	Thermal head temperature abnormality	12.	Power ON/OFF sequence protection
	NOT
	detection
6.	Blow-out fuse detection	13.	Motor over-current protection
7.	Head voltage abnormality detection	14.	Hardware timer

■ DIMENSIONS

1. Printer mechanism

		DESIGN				NEW
		Center of Paper	FORPlaten Open					Platen Open
				Platen Close
									Platen Close
					Paper Insertions		Center of Paper			Paper Insertion
	when close)
whenopen
										15.5

Unit: mm

Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).

2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.

4