Fujitsu FTP-628 Series manual For

FTP-628MCL Series

■SPECIFICATIONS

	Item			Specification
Interface		Conforms to RS232C / Centronics
	For print head	4.2 - 8.5 VDC average current, 0.79 (1.3) A (print ratio:
		12.5%, print speed: 60mm/sec.) ( ) is the peak value
Power
	For printer and cutter motor	4.2 - 8.5 VDC, 1A maximum
supply
	For logic	5 VDC ± 5%, 0.5 A maximum
Dimensions	Printer mechanism	69.6 x 34.3 x 15.5 mm (WxDxH) head down
	Interface board	131 x 99 x 24 mm
Weight (Mechanism)		Approximately 53g (without knob)
		Pulse resistance: 100 million pulses/dot (under our
Head life		standard conditions)
		Abrasion resistance: paper traveling distance 50km
		(print ratio: 25% or less)
	Operating temperature	+5˚ C to +40˚ C (printing density assurance range,
		operation is possible at 0˚ C to +40˚ C)
NOT
Operating	Operating humidity	20 to 85% RH (no condensation)
environment
	Storage temperature	-20˚ C to +60˚	C (paper not included)
	Storage humidity	5-95% RH (no condensation)
		FOR
	Head temperature	Detected by thermistor
	detection
Detection
	Paper out/mark detection	Detected by photo-interrupter (all models)
function
	Head up detection	Detected by micro-switch (003, 004 only)
		High sensitive paper: TF50KS-E4 (Nippon Paper)
		Standard paper:			NEWTF60KS-E (Nippon Paper) -
				FTP-020PU001/ FTP-020P0104
	DESIGNPD150R (Oji Paper) -
				FTP-020P0701
		Medium life storage paper:
Recommended thermal sensitive paper			TF60KS-F1 (Nippon Paper) -
			FTP-020P0102
			PD170R (Oji Paper)
			P220VBB-1 (Mitsubishi Paper)
			PH65BC-3H (Oji Paper)
		Long life storage paper:
			PD160R-N (Oji Paper)
			AFP-235 (Mitsubishi Paper)

3