Fujitsu FTP-632MCL302, FTP-632MCL301 manual For, Not

FTP-632MCL301/302

(Continued)

	Item			Specifications
Part number			FTP-632MCL301/302
Interface			Centronics (ESC/POSTM), RS232C
			24 VDC ± 5%, Voltage
			Current : average*2 ( ): Peak
		For head	1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
			0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
Power supply			0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
		For motor	24 VDC ± 5%, 1.0 A maximum
		For cutter	24VDC ± 5%, 1.0 A maximum
		For logic	5 VDC ± 5%, 0.5 A maximum
Dimensions		Mechanism (cutter)	123 (W) × 70 (D) × 42 (H) mm (w/cutter)
		Interface board	131 (W) × 89 (D) × 24 (H) mm
Weight (Mechanism+Cutter)			approximately 380 g (w/cutter)
		Mechanism	Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard
				driving method)
Expected life			Wear resistance : 50 km (at 25% printing ratio)
		Cutter	3 × 105 cuts
		Operating temperature	0 to +50°C*3
Environmental		NOT
		Operating humidity	20 to 85% RH (no condensation)
conditions
		Storage temperature	–20 to +60°C (excluding paper)
		Storage humidity	5 to 95% RH (no condensation)
		Head temperature	By thermistor (applied energy control, abnormal temperature detection)
			FOR
Detection		Paper out/Mark detect	By photointerrupter
		Head-up	By microswitch
			For front insertion use (80 mm width)		: FTP-030PU001, FTP-030P0701
Recommended thermal sensitive paper			For rear insertion use (85 mm width)		: FTP-030P0020, FTP-030P0702
			*Recommended papers		NEW: PD150R, PD160R, PD170R
			· Oji Paper
			· NIPPON Paper		: TF50KS-E,TF60KS-E,TF60KJ-R
			· MITSUBISHI Paper Mills		: P220VBB-1, AFP-235
		DESIGN

*1: There may be exceptions.

*2: 24 VDC, minimum head resistance.

*3: Guarantee: +5°C ~+40°C.

3