Fujitsu FTP-637MCL601, FTP-637MCL401 manual Part numbers, Specifications

FTP-637MCL401/601

nPart numbers

			Part Number
Easy Load Model with low profile cutter			FTP-637MCL401
			FTP-637MCL601
LSI for driving		MCL401	FTP-627CU301R
		MCL601	FTP-627CU601R
Interface	Cutter	MCL401	FTP-637DSL291R Parallel (Centronics) /Serial (RS-232C)
board for	supported
		MCL401	FTP-637DSL623R USB (V 1.1)
Mech/Cutter			FTP-637DSL625R Serial (RS-232C)
		MCL601	FTP-637DSL633R USB (V 1.1)
			FTP-637DSL635R Serial (RS-232C)/
Interface	Parallel (Centronics)		FTP-628Y202
cables
	Serial (RS232C)		FTP-628Y302
	USB		FTP-629Y301
Power	Logic		FTP-629Y401
cables	Head, motor		FTP-629Y601

nSPECIFICATIONS

Item		Specifications
Part number		FTP-637MCL401/601
Printing method		Thermal-line dot method
Dot structure		576 dots/line
Dot pitch (Horizontal)		0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)		0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area		72 mm
Number of columns		ANK 48 columns/line (maximum 12 x 24 dot font)
Paper width		80 mm
Paper thickness		60 to 85 µm (some paper in this range may not be used because of
paper characteristics)
Printing Speed	MCL401	Maximum 100mm/sec. (800 dot line/sec.)
	MCL601	Maximum 150mm/sec. (1,200 dot line/sec.)
Character types		Alphanumeric, kana:	159 types
		International characters:	195 types
		JIS Kanji (Kanji CG loaded board):	about 6800 types
Character, dimensions (W×H), number of		2 × 24 dots, (1.5 × 3.0 mm), 48 columns: ANK
columns		24 × 24 dots, (3.0 × 3.0 mm), 24 columns: ANK
		8 × 16 dots, (1.0 × 2.0 mm), 72 columns: ANK
		6 × 16 dots, (2.0 × 2.0 mm), 36 columns: ANK