nFUNCTION OF INTERFACE BOARD
| Item |
| Item |
1. | Test print function | 8. | Cutter trouble detect |
2. | Paper out detection | 9. | Motor power saving function |
3. | Paper near end detection | 10. | Mark detection function |
4. | Paten open detection | 11. | MCU operation abnormality detection |
5. | Thermal head temperature abnormality | 12. | Power ON/OFF sequence protection |
| detection |
|
|
6. | 13. | Motor | |
7. | Head voltage abnormality detection | 14. | Hardware timer |
ndimensions
1.Printer mechanism
7.5 | (14.4 max.) | 22.1 13.1 | |
13.9 | |||
| |||
| (42.2) |
| |
10.7 | max.) |
| |
5.4 | (29.3 |
| |
21.8 | 28.3 |
| |
|
|
Center of paper
90.4
36.0
| .6 |
| Center of mechanism |
| 27.7 |
| 1.6 |
103.2 / 104.5 |
|
55 | degrees |
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2.Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.