Fujitsu FTP-637MCL601 manual FTP-637MCL401/601, n SPECIFICATIONS

FTP-637MCL401/601

nSPECIFICATIONS

Item			Specification
Interface			Conforms to RS232C/Centronics
Power	For print	MCL401	24 VDC average current, 0.7A (1.3A peak)
supply	head	MCL601	24 VDC average current, 1.3A (2.5 A peak)
			(print ratio: 12.5%, print speed 100mm/sec.)
	For motor		24 VDC ±5%, 1.0 A maximum
	For cutter	MCL401	24 VDC ±5%, 1.1 A maximum
		MCL601	24 VDC ±5%, 1.3 A maximum
	For logic		3.3 to 5.25 VDC, 0.2 A maximum
Dimensions	Mechanism with cutter		104.5 x 42.2 x 21.8 mm (WxDxH)
	Interface	DSL291	70 x 60 x 12 mm (WxDxH)
	board	DSL6xx	95 x 70 x 21.6 mm (WxDxH)
Weight	Mechanism with cutter		Approximately 118g/122g
	Interface board		Approximately 50g / 50g
Life	Head	MCL401	Pulse durability: 50 million pulses/dot (print ratio: 12.5% or less).
		MCL601	Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less).
		MCL401	Abrasion resistance:	paper traveling distance 50km
		MCL601	Abrasion resistance:	paper feed length 100km.
	Cutter	MCL401	500,000 cuts
		MCL601	1,000,000 cuts
	Platen		5,000 times (open/close)
Operating	Operating temperature*		0ºC to +50ºC
environment	Operating humidity		20 to 85% RH (no condensation)
	Storage temperature		-20ºC to +60ºC (paper not included)
	Storage humidity		5 to 95% RH (no condensation)
Detection	Head temperature		Detected by thermistor
function	detection
	Paper out/mark		Detected by photo-interruptor
	detection
	Platen release		Detected by sliding switch
Recommended thermal sensitive paper			High sensitive paper	TF50KS-E4 (Nippon paper)
			Standard paper	TF60KS-E (Nippon paper),
				FTP-020PU001 (58mm)
				PD150R (Oji paper)
				FTP-020PU701 (58mm)
			Medium life paper	TF60KS-F1 (Nippon paper)
				FTP-020P0102 (58mm)
				PD170R (Oji paper)
				P220VBB-1 (Mitsubishi paper)
			Long life paper	PD160R (Oji paper)
				AFP-235 (Mitsubishi paper)
				TP50KJ-R (Nippon paper)
				HA220AA (Nippon paper)

*+5˚C to +40˚C printing density assurance rance.