BASIC OPERATIONS (Continued)
TURNING THE POWER TO STANDBY
1
2
3
*You can also use the buttons on the projector's control panel to perform these steps.
Press .
The confirmation display appears.
Press E to select "OFF".
Press <.
The projector operates as follows:
(1)The color of the power indicator lamp turns from
green to orange (flashing) to indicate that the cooling of the light source lamp is in progress.
(2)The cooling fan rotates for 2 minutes. For one minute after the cooling of the light source lamp is started, the buttons on the projector and remote control are disabled, and the light source lamp cannot be lighted again. (After one minute, the lamp can be turned on again.)
(3)When the cooling is completed, the fan stops operation, and then the power monitor indicator lamp turns on in red, resulting in the "standby" mode.
*Even after the power is turned to standby mode, the cooling fan continues rotating while high temperature remains inside the projector (for approximately 2 minutes). While the cooling is in process, do not unplug the power cord from the receptacle.
*Pressing "POWER" button twice successively will also turn the power to standby mode.
