BASIC OPERATIONS (Continued)
ADJUSTING THE RECTANGULAR DISTORTION OF THE PICTURE
1
2
3
4
Press \.
The adjustment menu display appears.
Press CD to select "Correct Keystone".
Press <.
The adjustment display appears.
Press EFCD to adjust the rectangular distortion of the picture.
Installation menu screen
Pressing Ccorrects the distortion of the upper portion of the picture.
Pressing Dcorrects the distortion of the lower portion of the picture.
* You can also use the buttons on the projector's control panel to perform these steps.
Pressing Ecorrects the distortion of the left side portion of the picture.
Pressing Fcorrects the distortion of the right side portion of the picture.
5Press < to register the adjustment result.
Note
•Adjustment of either of the vertical or horizontal axis restricts the adjustment range of the other. (For example, if the horizontal axis is adjusted to the maximum level. adjustment of the vertical axis will be made impossible.)
•Adjustment with the Keystone button may cause change the aspect ratio. In this case, correct the aspect ratio by adjusting the size.
