2.3.5 Installing Driver and Software

The driver and other software are stored on the setup CD-ROM supplied with the image scanner. Install the driver first, and then install the software.

∙

∙

To install the driver, run “Setup.exe” in the \Driver\Disk1 folder on the CD-ROM.

The Fujitsu TWAIN32 driver is installed and registered on the TWAIN32 source selection screen.

To install other software, run “Setup.exe” in the \Tools\Disk1 folder on the CD-ROM.

The following software is installed in “Start” – “Programs” – “Tools”:

COPY:

Sets the image quality when image data is being

 

copied by the image scanner.

 

COPY Help:

Displays Help information concerning COPY.

Image:

Sets the image quality when image data is scanned

 

by the image scanner.

 

Image Help:

Displays Help information about

Image.

Uninstall Tools:

Uninstalls the Tools software.

 

Launch Help:

Displays Help information about

the status-

 

monitoring program of the scanner operator panel.

Readme:

Displays the Readme.txt.

 

“Launch” is registered in “Start” – “Programs” – “Startup”. As “Launch” is required to use the scanner operator panel, do not remove it.

uKey point

Thoroughly read “Readme.txt” on the CD-ROM before installation.

You must install the driver and all software components in order to use the operator panel of the image scanner.

2-8

M3092DC Image Scanner Operation Guide