5)Adjust the document guides to the document width, then straighten the documents. And, ajust the position of document stopper to the document size (length).
If the documents are placed loosely between the left and right guides, they may be read diagonally.
6)Specify a copy count using the Function button.
7)Adjust the copy density using the copy density dial, as required.
8)Switch the reading mode by pressing the Duplex button.
When the Function No. display panel is ON, the single
When the Function No. display panel blinks, the double
9)Press the Send to button on the scanner.
The set documents are read and output from the printer.
uKey point
Press the Send to button to start the application software. The Ι mark is displayed until the application starts.
If the application software does not start and the Function No. display panel displays the Function No. again, copy processing is canceled.
10)After finishing reading, remove the documents from the Document cover.
M3092DC Image Scanner Operation Guide |