③Pull up the ADF paper chute as follows:

•Hold the document cover with one hand and pull up the ADF paper chute with the other hand to set the shaft in position B.

ADF paper chute

Document cover

ADF paper chute

Rotation direction

 

Shaft

Position for storage

Position for operation

position A

position B

Figure 4.3

ADF paper chute setting

④Fan the documents as follows:

•Take a 15 to 20 mm thickness of documents. Lightly hold both ends with both hands. Bend the documents into an arch as shown below.

•Then hold the documents tightly with both hands, and straighten the documents. The center of documents swell and air is introduced between the documents.

•Repeat this operation two or three times.

•Turn the documents 90°, and repeat the operation again.

15 to 20 mm

4 – 7