Fujitsu M4099D Setup, Browse, and Test Modes

6-1

Setup, Browse, and Test Modes

This scanner has the setup mode, browse mode, and test mode to ease setting up.

• Setup mode for customizing the scanner for user requirements

• Browse mode for glancing setup conditions of the scanner

• Test mode for testing the scanner offline

There are two ways to enter these modes:

• Way 1

Press

MENU

when the LCD indicates “Ready”.

You can use the setup mode and browse mode. To quit a mode, press

CANCEL

.

• Way 2

Turn the power on while pressing

MENU

.

You can use the test mode in addition to the setup mode and browse mode. To quit a mode, turn

off the power.

Available functions differ with modes or with ways. For details, see descriptions of each function.

Functions not available in setup mode

Way Functions not available

MENU

pressed in Ready status IPC-3 mode, Interface, TP_IF baud rate, RS232C baud rate, SCSI ID, Product ID,

Function key, Setup mode lock

Power on with

MENU

pressed Settings

Functions not available in browse mode

Functions not available

Paper thickness setup

Contents

Main Page North American contact: European contact: Australian contact: Please send your comments on this manual or on Fujitsu products to the following addresses: Asian contact: IMPORTANT NOTE TO USERS Preface Conventions CONTENTS Page COMPONENTS Checking the Components Units and Assemblies Units Page Assemblies Arrangement Operator Panel 1-6 Button/LED Function POWER DATA CHECK LCD Display Operation status display Error status display Buzzer Page Precautions Page Page Page Page Page Page Basic Operation of the Operator Panel Displaying detailed information if an error occurred Lifting or lowering the hopper Clearing a consumable life alarm Confirming the number of sheets processed by the scanner Using the function buttons (F1, F2, and F3) Using the setup, browse, and test modes 3-8 * Turn off to quit <<MODE SELECT>>. : Cursor buttons : Blinking 3-9 Transition of operator panel status and display The following outlines the transition of status and display of the operator panel. Turn power off to quit. Error occurred Page A Feeding Direction B Document Size Document Quality Paper types of documents Ream weight of paper Precautions Page Page Installation Specifications Page Consumables Page SETUP, BROWSE, AND TEST MODES Setup, Browse, and Test Modes Functions not available in setup mode Functions not available in browse mode Activating the Setup or Browse Mode SETUP BROWSE XXXXX Button functions in setup or browse mode Mode selection ( 6-3 MENU pressed in Ready status) ENTER Contents of the Setup or Browse Mode 6-5 6-6 Setup mode menu screen : Cursor buttons : Blinking * To save the change, press ENTER. To quit without saving change, press CANCEL. Transition of screens in setup mode Settings Page Paper length check ON 10 mm Paper thickness check Paper thickness setup Page Skew check IPC-3 mode IPC-3 Mode Paper types and corresponding pattern numbers 6-16 Hopper height This function sets the initial height of the hopper. Set the height which you frequently use. Reading parameter validity Page Paper separation level Set braking power according to the table below. Page Drop-out color Page Consumable counter Buzzer Page Buzzer volume LCD contrast Picking speed Page Interface TP_IF baud rate RS232C baud rate Page SCSI ID Product ID Pre-pick Page Pick start time Manual feed timeout Manual Feed Timeout 10 S Manual Feed Timeout Paper pick retry Page Paper feed retry Page Function key Page Setup mode lock Setup Mode Lock Page Activating the Test Mode <<TEST MODE>> T Please wait SETUP BROWSE TEST SETUP BROWSE TEST <<TEST MODE>> Offline Feed Test Mode selection (power on with MENU pressed) 6-48 * Turn off to quit <<MODE SELECT>>. : Cursor buttons : Blinking Contents of the Test Mode Offline feed test Page Options Device life GLOSSARY OF TERMS Page Page Page Page Page Page INDEX A C B D O P G H I M S T U R