6-29
Interface
This function sets the host interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
Remarks
Auto: The scanner automatically detects the
interface through which a host
computer issues a command.
TP_IF: Third party’s interface
LCD display
Interface
Options
Auto, SCSI, Video, TP_IF (Default: Auto)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until “Interface” ap-
pears in the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the
current setting AUTO blinking (blinking
indicates “changeable”).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Interface
Interface
AUTO
The following is an example of operation when you use this function.