Fujitsu MAP3367NC/NP manual Environmental specifications, Environmental/power requirements, Iops

2.1.3Environmental specifications

Table 2.3 lists environmental and power requirements.

		Table 2.3		Environmental/power requirements
	Item					Specification
				MAP3147NC/NP		MAP3735NC/NP	MAP3367NC/NP
	Operating					5 to 55°C
	Non-operating					–10 to 70°C
Temperature	Transport (within a					–40 to 70°C
	week)
(*1)
	DE surface temperature					5 to 60°C
	at operating
	Gradient					15°C/h or less
	Operating					5 to 95%RH
	Non operating					5 to 95%RH
Relative	Transport (within a					5 to 95%RH
humidity	week)
	Maximum wet bulb				29°C (no condensation)
	temperature
	Operating (*3)			0.6 mm (5 to 20Hz)/9.8 m/s2 (1G) (20 to 300 Hz) or less
Vibration (*2)	Non-operating (*4)			3.1 mm (5 to 20Hz)/49m/s2 (5G) (20 to 300Hz) or less
	Transport (packaged)			3.1 mm (5 to 20Hz)/49m/s2 (5G) (20 to 300Hz) or less
	Operating				637.4m/s2 (65G) (2 ms)
Shock (*2)	Non-operating			1961.3m/s2 (200G) (2 ms)
	Transport (packaged)			1961.3m/s2 (200G) (2 ms)
Altitute	Operating					–300 m to 3,000 m
(above sea	Non-operating				–300 m to 12,000 m
level)
			Ready			0.63 A
			(Average)
			Peak
			within			3.0 A
	+12 VDC		100 ∝ s at
	±5%		spin-up
Power			Random
requirements			W/R			0.90 A
Input power			(about 80
(*5)			IOPS)
			Ready			0.38 A
	+5 VDC		Random
			W/R
	±5% (*6)					0.70 A
			(about 80
			IOPS)
	Ripple (*7)				+5 V/+12 V 250 mVp-p

(*1) For detail condition, see Section 4.1.

(*2) Vibration applied to the drive is measured at near the mounting screw hole on the frame as much as possible.

(*3) At random seek write/read and default on retry setting with log sweep vibration.

2-4 C141-E166