7
MB15C02
■ELECTRICAL CHARACTERISTICS(For 220 MHz :VDD = Vp = 1.0 to 1.5 V, Ta = –20 to +60°C)
(For 330 MHz :VDD = Vp = 1.2 to 1.5 V, Ta = –20 to +60°C)
(For 450 MHz :VDD = Vp = 1.3 to 1.5 V, Ta = –20 to +60°C)
*1: Conditions; Inputs except for fin, OSCIN and TEST are grounded, Outputs are opened.
Specifying the current flowing in VDD and Vp at operating state under conditions of VDD = Vp, fin =
220 MHz, or 330 MHz, and OSCIN = 12.8 MHz.
The current at locking state shows IDD Supply current (P.20).
*2: Conditions; PS = Low, Inputs except for fin, OSCIN and TEST are grounded, Outputs are opened.
*3: Condition; Ta = 25°C
*4: Condition; Ta = –20 to +60°C
Parameter Symbol Condition Value Unit
Min. Typ.*3 Max.*4
Power supply current Active Mode IDD *1 (VDD=1.0V/220MHz)
(VDD=1.2V/330MHz)
(VDD=1.3V/450MHz)
–
–
–
0.6
1.0
1.3
1.2
1.8
2.2 mA
Power saving current Power sav-
ing mode IDDS *2 (VDD=1.0V)
(VDD=1.2V)
(VDD=1.3V)
–
–
–
50
70
80
250
300
350 µA
Operating frequency
fin fin
Programmable divider
(VDD=1.0 to 1.5V)
(VDD=1.2 to 1.5V)
(VDD=1.3 to 1.5V)
10
10
10
–
–
–
220
330
450
MHz
OSCIN fOSC Programmable
reference divider 5–20MHz
Input sensitivity fin Vfin AC coupling –2.0 – – dBm
OSCin VOSC AC coupling –2.0 – – dBm
Input voltage Except for
fin and
OSCin
H level VIH –VDD –
0.2 ––
V
L level VIL ––– 0.2
Input current Except for
fin, OSCin
and TEST
H level IIH VIN=VDD ––+1.0
µA
L level IIL VIN=GND –1.0 – –
Output voltage
Except for
OSCOUT
and φP
H level VOH IOH = –0.2 mA VDD –
0.2 ––
V
L level VOL IOL = 0.2 mA – – 0.2
φPL levelV
OL IOL = 0.2 mA – – 0.2 V
High impedance
cutoff current
Do IOFF1 VOUT = GND to VP–100 – 100 nA
φPI
OFF2 VOUT = VDD ––100nA