Removal and Replacement Procedure

2.1Spare Parts

See Table 2.1 for the model and parts numbers to order the replacement disk drive.

Table 2.1 Model and parts numbers

Model Name

Capacity

Mounting screw

Order No.

(user area)

 

 

 

 

 

 

 

MHV2080BS

80GB

M3 Depth 3

CA06672-B708

 

 

 

 

MHV2060BS

60GB

M3 Depth 3

CA06672-B706

 

 

 

 

MHV2040BS

40GB

M3 Depth 3

CA06672-B704

 

 

 

 

2.2Disk Drive Removal

The method and procedures to demount the disk drive to check the jumper terminal, change the jumper position, or replace the device differ depend on the system cabinet structure. Therefore, for actual working procedures, the specific conditions necessary for each system must be determined. The general removal procedures, with notes, are as follows.

a)Disconnect the power-interface cable.

b)Remove the screws that attach the drive and remove the drive from the system cabinet.

c)When storing or transporting the drive, pack it an antistatic bag in compliance with section 1.1.2 (5) d. and (5) e..

To protect the device from damage and prevent the worker getting hurt, observe the following cautions and precautions in Subsection 1.1.1.

Damage or Device damage

1.Perform any removal after the system power is completely disconnected. The cable must not be disconnected and the screws that attach the drive must not be removed with the power ON.

2.Do not move the drive and attach or detach the connector until it comes to a complete stop (about 30 s after the power is turned OFF).

3.Perform the human body grounding to discharge any static electricity from your body. (Be sure to wear a wrist strap)

2-2

C141-F075

Page 32
Image 32
Fujitsu MHV2040BS, MHV2080BS, MHV2060BS manual Spare Parts, Disk Drive Removal, Model and parts numbers

MHV2040BS, MHV2060BS, MHV2080BS specifications

Fujitsu's MHV series of hard disk drives, including the MHV2040BS, MHV2060BS, and MHV2080BS, are designed for high-performance applications in various computing environments. These models feature a 2.5-inch form factor, making them suitable for both laptop and desktop systems, where space and efficiency are crucial.

The MHV2040BS, with a capacity of 40GB, provides an ideal solution for users requiring dependable storage for basic computing tasks. The MHV2060BS boosts the capacity to 60GB, accommodating users who require additional space for multimedia files and applications. For those needing significant storage, the MHV2080BS comes in at 80GB, catering to heavier workloads and larger datasets.

All three models utilize a robust 5400 RPM spindle speed, offering a balance between performance and energy efficiency. The drives are equipped with an Ultra ATA/100 interface, enabling high data transfer rates for smoother operation and faster file access. This interface is particularly beneficial for users operating in environments with demanding I/O operations.

In terms of technologies, the MHV series integrates advanced features aimed at enhancing data integrity and performance. The drives utilize Fluid Dynamic Bearings (FDB) that minimize mechanical noise and vibration, resulting in quieter operation and increased reliability over time. Additionally, these models are designed to withstand higher shock levels, making them resilient in mobile applications or environments where durability is paramount.

The MHV series is optimized for lower power consumption, ensuring that users can enjoy longer battery life in portable devices while maintaining system performance. With a mean time between failures (MTBF) rating that exceeds 600,000 hours, Fujitsu emphasizes the longevity and reliability of the MHV2040BS, MHV2060BS, and MHV2080BS drives.

Ultimately, the Fujitsu MHV series represents a blend of innovation and practicality. With their robust build quality, commendable performance characteristics, and energy-saving features, they cater to a wide range of storage needs, from everyday computing to more demanding applications, making them a suitable choice for both personal and business environments.