Fujitsu N3530 manual Main Menu Setting Standard System Parameters

M a i n M e n u

MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS

The Main Menu allows you to set or view the current system parameters. (See Navigating Through The Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields for the Main menu and its submenus, all of the options for each field, the default settings and a description of

the field’s function and any special information needed to help understand the field’s use.

System Time and System Date can also be set from your operating system without using the setup utility. Use the Date and Time icon on your Windows Control panel or type time or date from the MS-DOS prompt.

InsydeH20 Setup Utility

Information Main Advanced Security Boot Exit

System Time:	[14:57:01]
System Date:	[03/28/2006]
Drive0	<Auto>
[FUJITSU MHV2100BH	]
Drive1	<Auto>
[DV-W28EAD	]
Language:	<English>

Adjust calendar clock.

<Pg Up> and <Pg Dn> keys increase and decrease setting.

Press <Tab> to change next item.

Up/Dn Select Boot Device

<>		Select Screen
		Select Item
Enter		Select ▲ Submenu
F1	=	Help
F9	=	Setup Defaults
F10 =		Save and Exit
Esc =		Exit

Figure 2. Main Menu

Table 2: Fields, Options and Defaults for the Main Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field	Options	Default	Description
System Time:	–—	–—	Sets and displays the current time. Time is in a 24 hour format
			of hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Example: 16:45:57.
			You may change each segment of the time separately. Move between the seg-
			ments with the [Tab] key. Change the setting using the Page Up and Page Down
			buttons.
System Date:	–—	–—	Sets and displays the current date. Date is in a month/day/year numeric format
			with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for
			example: 03/20/1998. You may change each segment of the date separately.
			Move between the segments with the [Tab] key. Change the setting using the
			page Up and Page Down buttons.

5