Fujitsu N3530 manual Security Menu - Setting The Security Features, S e c u r i t y M e n u

S e c u r i t y M e n u

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current security configuration. (See Navigating Through The Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields for the Security menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection.

If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data.

■If you make an error when re-entering the password a [Warning] will be dis- played on the screen. To try again press the Enter key and then retype the pass- word. Press the Esc key to abort the password setting process.

■Entering a password incorrectly 3 times in a row will cause the keyboard and mouse to be locked out and the warning

[System Disabled] to be displayed. If this happens restart the computer by turning off and on the power with the power switch and use the correct pass- word on reboot.

■If the Power Management Security is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled.

InsydeH20 Setup Utility

Information Main Advanced Security Boot Exit

Supervisor Password	: Clear
User Password	: Clear
Set Supervisor Password	<Enter>
Set User Password	<Enter>
Set User Password Length:	<0>
Password on Boot:	<Disabled>
On Automatic Wake up:	<Disabled>
KB Lock on Resume:	<Disabled>
Boot from Removable Media:	<All>
Flash Write:	<Enabled>
▲ Hard Disk Security
▲ Owner Information

Press <Enter> key to set Supervisor Password to enable any password features.

Then password entry is required to enter BIOS Setup.

Up/Dn Select Boot Device

<>		Select Screen
		Select Item
Enter		Select ▲ Submenu
F1	=	Help
F9	=	Setup Defaults
F10 =		Save and Exit
Esc =		Exit

Figure 10. Security Menu

15