OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
• Specifying RGB Input Signal (Code Setting) | for RGB2, RGB3 |
Normally, use this option in Auto mode.
•Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor 
or 
, one of the available choices appears in the following sequence:
On 
Off
Off: Does not display white.
On: Displays a white screen immediately.
Press 
to store.
•Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by
unspecified persons.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press 
to store.
*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
*The setup will be cancelled when removing the power plug from the receptacle.
•Illumination
You can to select to display a blue illumination on the front of the tuner. Each time 
or 
is pressed, the setting is changed.
Off 
On
Off: Illumination is turned off.
On: Illumination is turned on.
Press 
to store.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press 
.
The “Information” screen will appear.
Mode: | Input mode appears at the upper right corner of the screen. |
Freq. Scan Mode: Frequency scanning | |
Input Signal: | Video mode |
Input Sync.: | Signal type |
Freq.: | Synchronized signal frequency, polarity |
Preset No.: | RGB code number |
Information screen (Video Mode)
Information screen (RGB Mode)
*