SELECTOR SECTION – FRONT

English

1Power indicator lamp

This lamp shows the state of the power supply.

Lit (red):

Stand-by

Lit (green):

Power ON

Lit (orange):

Power saving (DPMS: Power saving function) mode ON (See P. E-42.)

Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.)

2Remote control signal receiver

Receives signals from the remote control.

3POWER button

Turns the power “ON” and “OFF”.

*Even when the power is “OFF”, some parts are still powered.

4Video3, S-video input terminal *

Connect this terminal to the S-video output terminal of your VCR, etc.

5Video3, video input terminal *

Connect this terminal to the video output terminal of your VCR, etc.

6Audio input terminals (L/R)

These are the audio input terminals for the Video3 and RGB3 terminals. Input the audio for the video to be seen here.

7RGB3 input terminal

Connect this terminal to your PC’s mD-sub output terminal.

* On selecting the video input format

(See “SETTING THE INPUT TERMINALS” on P. E-41.)

Warning

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

E-9