OTHER ADJUSTMENTS (Continued)
OTHER SETTINGS
Auto
You can make to the standby state automatically when the no signal state continued during set up time. Press CDto select the "Time".
Press EFto select the amount of time before the standby state starts.
Press <to store.
*The numerical value is the approximate amount of time before the standby state starts. You can assign the black or white color for the background color at the no signal state. Press CDto select the "Background".
Press EFto select the displayed background displayed.
Black White
Press <to store.
*The background color changes to assigned color state after approximate 20 seconds at the no signal state.
•Selecting input terminals (Audio Input)
You can use this option to select the available terminals to receive the audio from input equipment.
(1)Select “Audio Input” and press <.
The “Audio Input” selection screen will appear.
(2)Press Cor Dto select video input terminal.
(3)Select a related audio input terminal.
Each time you press Eor F, one of the available choices appears in the following sequence:
[No audio]: No audio in the corresponding mode.
[Audio
[Audio 4]: HDMI(for the U model)
*Repeat steps (2) and (3) for each piece of input equipment.
(4)Press <to store.
*Audio Input menu will not be displayed when “No Audio” is selected.
Auto
“Audio Input” selection screen (In the case of the U model)
