OTHER ADJUSTMENTS (Continued)
•Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press Eor F, one of the available choices appears in the following sequence:
On Off
Press <to store.
*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
*The setup will be cancelled when removing the power plug from the receptacle.
•Displaying System Status (Information)
Displays system operation status. Select “Information” and press <. The “Information” screen will appear.
[Mode]: Input mode appears at the upper right corner of the screen
[Freq. Scan Mode]: Frequency scanning
[Input Signal]: Video mode
[Input Sync.]: Signal type
Information screen (Video Mode)
[Freq.]: Synchronized signal frequency, polarity
[Preset No.]: RGB code number
Information screen (RGB Mode)
Note
•The screen display disappears if there is no operation within approximately 60 seconds.
•Depending on the model or the optional devices, some of the functions may not be available.
•The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
