Kyocera KM-1820 manual Adjusting Alarms, Available, Settings, Description

		System Settings
	Adjusting Alarms
	The following shows the various alarms and the available volume settings.
Item	Available	Description
	Settings
Volume	0 Off	Adjust the volume of the alarms. To make all alarm sounds inaudible,
	1 Minimum	select the Off setting. The larger the setting value, the larger the
	2	volume.
	3 Middle
	4
	5 Maximum
Key Conf. Buzzer	Off	Indicates that the machine has accepted the key operation that was
	On	performed by the user.
Key Fail Buzzer	Off	Indicates that for some reason the machine is unable to accept the key
	On	operation that was performed by the user.
Reset Buzzer	Off	Indicates that Reset/Power was pressed in order to reset the current
	On	settings.
Job End Buzzer	Off	Indicates that a corresponding copy, print, or send job was completed
	On	or that the machine has returned to an operation-ready state.
Ready Buzzer	Off	Indicates that the machine is in an operation-ready state.
	On
Warning Buzzer	Off	Indicates that in its current state the machine is unable to perform the
	On	corresponding job.
		This setting applies when one of the following messages appears on
		the display.
		Close Document Processor.
		Insert Cassette 1.
		KPDL error. Job is ended.
		Load Paper in Cassette1 (Cassette2, MP Tray, or Document
		Processor).
		Memory overflow. Part of the job end is printed.
		Place original and press Start key.
		Print overrun. This page isn’t complete.
		Remove original from Document Processor.
		Send error.
		Toner low.

ADVANCED OPERATION GUIDE 5-9