Kyocera KM-1820 Registering Custom Paper Size, Measurement, X Range, Y Range, System Menu Counter

System Settings

Registering Custom Paper Size

If you normally copy or print onto a paper size that is not registered in this machine (non-standard size), it is convenient to register that size in advance. It is possible to register a custom paper size within the following ranges:

Measurement	X Range	Y Range
Inch specifications	3.15 to 8.50 inches	5.83 to 14.02 inches
Metric specifications	80 to 216 mm	148 to 356 mm

System Menu/

Counter

Sor T

Common Setting

Enter

Sor T

Orig./Paper Set

Enter

Sor T

Custom PaperSize

Enter

1 Access Custom PaperSize.

If you are unsure how to use this route map refer to Accessing Menu Items on page vii.

2 Press S or T to select Custom and press Enter. The Size Entry(Y) screen is displayed.

3 Use the numeric keys to enter the Y dimension (height) of the print paper to be registered.

Once the height is displayed, press Enter. The Size Entry(X) screen is displayed.

4 Use the numeric keys to enter the X dimension (width) of the print paper to be registered.

Once the width is displayed, press Enter. The display shows Registered and returns to the Orig./Paper Set screen.

ADVANCED OPERATION GUIDE 5-17