Kyocera KM-1820 manual Advanced Protocols Netware

Using COMMAND CENTER

Advanced > Protocols > Netware

	This printing system supports both NDS and bindery printing in either print server
	mode or remote printer mode.
	NetWare setup requires installation of the following client software and logon with
	Administrator Privileges. If you are unsure, please contact your network
	administrator.
	With Novell Client, creation of the NetWare print objects with the AdminManager
	NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare
	printing, you may use the NetWare Client from either Novell or Microsoft.
	For Admin Privileges, network operations (creating queues etc.) require 'admin' or
	'supervisor' privileges (or equivalent). Certain portions of AdminManager may be
	inoperable if you attempt those operations without sufficient privileges.
Item	Description
NetWare Protocol	Enables or disables the Network Protocol.
Bindery Mode	Enables or disables Bindery Mode.
Frame Type	Sets the Frame type. You can choose from Auto, 802.3, Ethernet-II, SNAP or
	802.2.
File Server (Primary)	Enter the name of the primary File Server to use.
NDS Tree	Enter the name of the NDS Tree.
NDS Context	Enter the NDS Context.
Print Server Mode	Enables or disables Print Server Mode.
Print Server Name	Enter the Print Server Name.
Queue Polling Interval	Enter the Queue Polling Interval in seconds.
Password (optional)	Enter the Password, if required. Login to NetWare will be successful only if the
	password set here matches the Print Server password set within the NetWare
	utilities.
Remote Printer Mode	Enables or disables Remote Printer Mode.
Remote Printer Name	Enter the name of the remote printer.
Job Timeout	Enter the timeout in seconds.

8-20 ADVANCED OPERATION GUIDE