Kyocera KM-1820 manual Fax, FAX Defaults, FAX Transmit

Using COMMAND CENTER

FAX Page

		This section includes settings, such as FAX transmission and reception settings, that
		apply to the FAX function of the device.
	FAX > Defaults
		The table below provides a summary of the items displayed on the FAX Default
		Settings page.
Item		Description
Local FAX Name		Specifies your FAX system name.
Local FAX Number		Specifies your FAX system number.
Local FAX ID		Specifies your FAX system ID.
FAX Line		Sets the type of phone line to correspond to the type of telephone service that
		you are using. Be sure that the type of phone line you select is correct because, if
		the setting is incorrect, dialing will be impossible. The choices are Tone (DPMF)
		or Pulse (10pps).
FAX Media Type		Sets the media type for printing the received documents. Refer to Paper
		Specifications.
Speaker Volume		Sets the volume of the internal speaker that allows you to listen to conditions on
		the telephone line when the On-Hook key was pressed. The choices are Off and
		levels 1, 2 or 3.
Monitor Volume		Sets the volume of the internal speaker that allows you to listen to conditions on
		the telephone line when the On-Hook key was not pressed. The choices are Off
		and levels 1, 2 or 3.
	FAX > Transmit
		The table below provides a summary of the items displayed on the FAX transmission
		page.
Item		Description
TTI		Selects On or Off whether to send the TTI (Transmit Terminal Identifier)
		information to other party.
TTI Position		Selects the TTI position to be printed on the transmitted documents.

8-14 ADVANCED OPERATION GUIDE