Samsung DV457EVGSGR/AA manual Information Codes, Error Display Trigger Action Taken

Troubleshooting

PROBLEM	SOLUTION
Lint on clothes	• Make sure the lint fi lter is cleaned before every load. With some loads that
	produce high amounts of lint, it may be necessary to clean the fi lter during
	the cycle.
	• Some fabrics are lint producers (for example, a fuzzy white cotton towel)
	and they should be dried separately from clothes that are lint trappers(for
	example, a pair of black linen pants).
	• Divide larger loads into smaller loads for drying.
	• Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled after	• Small loads of 1 to 4 items work best.
Wrinkle-Care	• Load fewer garments.
	• Load similar-type garments.
Odors remain in clothing	• Fabrics having strong odors should be washed in a normal cycle.
after Refresh.
Water drips from the nozzle	• This is steam condensation. The dripping water will stop after a short time.
when Steam-Care starts
Sprayed water is not visible	• Sprayed water is difficult to see when the door is closed.
during Steam-Care
The drying time is too long.	• Please check the selected cycle, Temperature and Dry level settings. (Please
	use the recommended Temperature and Drying Level.)
	• Check if the Eco Dry function is enabled in the Normal or Time dry cycles.
	(If the function is enabled, the drying time is extended to save energy
	consumption.)

INFORMATION CODES

Samsung’s Smart Care, an automatic error-monitoring system, detects and diagnoses problems at an early stage and provides a quick and easy solution through LCD navigation.

When your dryer has a problem, the notifi cation screen will show the information and solution to help you better understand what is occurring with your dryer and how to solve the problem.

Information codes may be displayed to help you better understand what is occurring with your Dryer.

ERROR DISPLAY	TRIGGER	ACTION TAKEN
tE	The thermistor resistance is very low	Clean the screen or vent.
	or high.	If the problem continues, call for service.
	The resistance of the thermistor for	Clean the screen or vent
tE3	the vent blockage detection is very
		If the problem continues, call for service.
	low or very high.
HE	Invalid heating Temp in running the	Call for service.
	dryer
dE	Running the dryer with door open	Clean the door and then restart.
		If the problem continues, call for service.

English - 62

DV457E1_02836J-06_EN_140428.indd Sec6:62 2014-04-28 ￿￿ 5:30:13