Drying a load of laundry

VENT SENSOR

Your Samsung dryer is equipped with a Vent Sensor, which detects and notifi es you when it is time to clean the ductwork. Keep your dryer safe and efficient by cleaning the ducts when prompted.

The Vent Sensor detects any duct blockages

You can fi gure out whether there is a duct blockage from the message below the process bar.

Level

Message

Status

Solution

 

 

 

 

0

No message

The ductwork is free from

-

 

 

blockages.

 

 

 

 

 

1

Check for vent

When a part of the duct

Check the duct

 

blockage after cycle

or the lint fi lter is blocked

connection, shorten the

 

completes.

by lint or a foreign object.

duct, or straighten it if

 

 

When the resistance is

necessary.

 

 

high because the duct is

Check the lint fi lter or

 

 

too long or bent.

the duct and clean it if

 

 

 

necessary.

 

 

 

 

2

Vent is blocked.

When the duct is blocked

Check the duct

 

Do not continue without

by lint or a foreign object.

connection, shorten the

 

checking vent.1)

When the resistance is

duct, or straighten it if

 

 

very high because the

necessary.

 

 

duct is too long or bent

Check the lint fi lter or the

 

 

excessively.

duct and clean it as soon

 

 

 

as possible.

 

 

 

 

1)In the LEVEL 2 state, this message is displayed for 3 hours after the completion of the cycle. (If the wrinkle prevention function is activated, this message is displayed for up to 3 hours.)

If the power button is pressed or the door is opened, the power is immediately turned off.

For more information about the duct installation, please refer to the “Ducting requirements” section on page 12.

Although the dryer is available even if the blockage message is displayed, the drying time may be extended.

If the LEVEL 1 message is displayed the fi rst time the dryer is run after installation, check the connection and clean the duct. If the LEVEL 1 message appears even after you have checked and cleaned the ducts, this may indicate that there are some restrictions of the duct due to the length, condition, etc.. If this occurs, you can use the dryer normally and no countermeasures need to be taken. However, the drying time may be extended or the drying performance may be degraded

English - 44

DV457E1_02836J-06_EN_140428.indd Sec3:44

2014-04-28 ￿￿ 5:30:09

Page 44
Image 44
Samsung DV457EVGSGR/AA manual Vent Sensor detects any duct blockages, Level Message Status Solution