Drying a load of laundry
With your new Samsung Dryer, the hardest part of doing laundry will be deciding which load to dry fi rst.
To reduce the risk of fi re, electric shock, or injury to persons,read the IMPORTANT SAFETY WARNING INSTRUCTIONS before operating this appliance.
DRYING FOR THE FIRST TIME
Before drying laundry for the fi rst time, you must run a complete empty cycle (i.e. no laundry).
1.Press the Power button.
2.Press the Start/Pause button.
The dryer runs the Normal cycle. This is the factory default cycle the washer will run until you select another cycle. This fi rst empty cycle removes any water that might be left over in the machine from the manufacturer’s test run.
BASIC INSTRUCTIONS
1.Load your laundry into the dryer.
Do not overload the dryer.
WARNING To determine the load capacity for each type of laundry, refer to the “Cycle chart” section on page 68.
Make sure that laundry is not caught in the door.
2.Close the door until it latches.
3.Turn the power on.
4.Select the appropriate cycle and its options in the LCD panel.
5.The selected cycle and its selected options light up and the estimated cycle time appears at the top right of the LCD panel.
6.Press the Start/Pause button.
Do not touch the door glass while your dryer is running. It may be hot.
English - 28