Steam cycles
Refresh | The Refresh cycle is best for smoothing out wrinkles and reducing odors in loads |
| of one to four items. |
|
|
Wrinkle Away | The Wrinkle Away cycle removes wrinkles from clothes stored in closets, etc. It |
| provides wrinkle release via optimized steam care. You can change the drying |
| time. (Minimum time : 20 minutes) |
| For best results, load no more than 3 items. |
|
|
Available options
You can view the currently selected options for the selected cycle and change them in the Option pane of the Cycle Selection screen. There are four options, Dry level, Temperature, Time, and Extras.
Dry level
Tap this option to change the currently selected dry level setting. The available dry level settings are Damp dry, Less dry, Normal dry, More dry, and Very dry. However, depending on the selected cycle, some of these options will be disabled.
Temperature
Tap this option to change the currently selected temperature setting. The available temperature settings are Extra Low, Low, Med Low, Medium, and High. However, depending on the selected cycle, some of these options will be disabled.
Time
Tap this option to change the currently selected time setting. The available time settings are Automatic, 20 min, 30 min, 40 min, 50 min, and 60 min. The Time option cannot be changed in the Sensor Dry cycles and Steam cycles. You can set the Time option in the Manual Dry cycles only (If the Eco Dry function is activated, you can choose up to 80 min for the time settings).
Extras
Tap this option to add extra cycles to or remove extra cycles from the selected cycle. The available extra cycles are Rack dry, Wrinkle prevent, Mixed load bell and Eco Dry. However, depending on the selected cycle, some of these extra cycles will be disabled. Tap each enabled extra cycle to add it to or remove it from the selected cycle.
Rack Dry - Rack Dry is available in the Time Dry cycle. the temperature is only set to Extra Low. RACK DRY is for items, such as washable sweaters and lingerie that should dry fl at and and also can be used with items such as stuffed toys that should not be tumbled.
Wrinkle prevent - Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling. The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
Mixed load bell - The mixed load bell that notifi es you when the average dry level in a load is damp dry (80 % dried).This lets you take garments that you don’t want fully dried or that dry quickly out of the dryer early while letting others continue to dry. You can select this function in all Sensor Dry cycles except Wool, Sanitize, and Active Wear. The dry level selections are limited to Normal Dry, More Dry, and Very Dry.
Eco Dry - This function is available in the Normal and Time dry cycles of DV457E* model. When the Eco Dry function is activated, drying takes longer but the power consumption is reduced by up to 20%.
(When the Eco Dry function is enabled, the drying time can be extended up to 3 times depending on the specifi ed temperature and the amount of laundry to be dried. When the product is shipped, the Eco Dry function is set to On by default.)
The total cycle time to be displayed may vary depending on the Eco Dry function selection.
English - 31
03 DRYING A LOAD OF LAUNDRY
