System Settings
Photo Processing Method
System Menu/
Counter
Sor T
Copy Setting
Enter
Sor T
Photo Processing
Enter
1 Access Photo Processing.
If you are unsure how to use this route map refer to Accessing Menu Items on page vii.
2 Press S or T to select the processing method and press Enter. The display shows Completed and returns to the Copy Setting screen.
Item | Description |
|
|
Error diffusion | This is the standard method that should be used |
| and is the factory default setting. Copies are |
| clearer if using originals with both text and photos. |
|
|
Dithering | Use this method for originals containing mainly |
| photos. When using the scanning or printing |
| functions, image processing is accomplished using |
| the Dithering setting. |
|
|
Resetting Toner Status
To ensure the correct information is displayed for the toner status, the toner gauge must be reset after replacing the toner container.
Setting Menu | Description |
|
|
Toner Gauge Rset (Toner | The toner counter is reset and the amount of toner |
Gauge Reset) | remaining will be printed out on the Status Page as |
| 100%. |
|
|
System Menu/
Counter
Sor T
Common Setting
Enter
Sor T
Toner Setting
Enter
To ensure the correct toner status is displayed, do not perform this procedure unless you have replaced the toner container.
1 Access Toner Setting.
If you are unsure how to use this route map refer to Accessing Menu Items on page vii.
2 Press S or T to select Toner Gauge Rset and press Enter. Are you sure? is displayed.
Press left Select. The display shows Completed and returns to the Toner Setting screen.
ADVANCED OPERATION GUIDE |