JVC rx-8010vbk manual Receiving Radio Broadcasts, Tuning in Stations Manually Using Preset Tuning

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Tuning in Stations Manually Using Preset Tuning

On the front panel:

1. Press FM/AM to select the band FM/AM

(FM or AM).

The FM/AM lamp on the front panel button lights up. The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

			TUNED	STEREO
ANALOG	L	R
	SPEAKERS			VOLUME
	1

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.

To store the preset stations

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Tune in the station you want to preset (see

“Tuning in Stations Manually” on the left).

• If you want to store the FM reception mode for this station,

select the FM reception mode you want. See “Selecting the

2.Press FM/AM TUNING 5/°until you find the frequency you want.

•Pressing FM/AM TUNING 5increases the frequency.

•Pressing FM/AM TUNING °decreases the frequency.

From the remote control:

1. Press FM/AM to select the band (FM or AM).

The FM/AM lamp on the front panel button lights up. The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

FM/AM TUNING

FM / AM

FM Reception Mode” on page 23.

			TUNED	STEREO
ANALOG	L	R
	SPEAKERS			VOLUME
	1

2. Press MEMORY.		MEMORY
ANALOG L	R	TUNED STEREO
SPEAKERS		VOLUME
1

The channel number position starts flashing on the display for about 10 seconds.

2. Press TUNING UP 3or

TUNING DOWN 2until you SET

find the frequency you want. DOWN – TUNING – UP

•Pressing TUNING UP 3increases the frequency.

•Pressing TUNING DOWN 2 decreases the frequency.

Notes:

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator also lights up.

•When you hold the button (and release it) in step 2, the frequency keeps changing until a station is tuned in.

3.	Press FM/AM PRESET 5/° to	FM/AM PRESET
	select a channel number while the
	channel number position is
	flashing.
4.	Press MEMORY again while the	MEMORY

selected channel number is flashing on the display.

The selected channel number stops flashing.

The station is assigned to the selected channel number.

			TUNED	STEREO
ANALOG	L	R
	SPEAKERS			VOLUME
	1

5.Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

22