JVC rx-8010vbk Available DSP Modes According to the Speaker Arrangement, Available DSP modes

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.

Make sure that you have set the speaker information correctly (see page 17).

Speaker arrangements				Available DSP modes
			Each time you press DSP MODE, the DSP modes change as follows:
Front		Front	THEATER 1	\ THEATER 2	\ HALL 1	\ HALL 2 \
	TV		LIVE CLUB	\ DANCE CLUB	\ PAVILION	\
speaker		speaker
	Center speaker		5CH STEREO (when using 5 speakers) or 4CH STEREO (when using 4 speakers)*					\
			3D ACTION or 3D DIGITAL		\ SURR. OFF (DSP OFF)			\
			(Back to the beginning)
Rear		Rear	To activate the Surround mode, press SURROUND ON/OFF button so that the
speaker		speaker	SURROUND ON/OFF lamp on the front panel button lights up.
			Notes:
Front	TV	Front	• If the settings for the center and the rear speakers are changed to “NONE” (see page 17),
			the Surround mode will be canceled.
speaker		speaker
			• When both of the Surround mode and DSP mode are deactivated, “SURR. OFF” appears
			on the display.
			* “5CH STEREO” is selected when setting the center speaker to “LARGE” or “SMALL,” and
			“4CH STEREO” is selected when setting the center speaker to “NONE” (see page 17).
Rear		Rear
speaker		speaker
			THEATER 1	\ THEATER 2	\ HALL 1	\ HALL 2 \
Front		Front	LIVE CLUB	\ DANCE CLUB	\ PAVILION	\
	TV		3D ACTION or 3D DIGITAL		\ SURR. OFF (DSP OFF)		\
speaker		speaker
	Center speaker		(Back to the beginning)
			To activate the Surround mode, press SURROUND ON/OFF button so that the
			SURROUND ON/OFF lamp on the front panel button lights up.
			Notes:
			• If the setting for the center speaker is changed to “NONE” (see page 17), the Surround
			mode will be canceled.
			• When both of the Surround mode and DSP mode are deactivated, “SURR. OFF” appears
			on the display.
			THEATER 1	\ THEATER 2	\ HALL 1	\ HALL 2 \
Front	TV	Front	LIVE CLUB	\ DANCE CLUB	\ PAVILION	\
speaker		speaker	3D ACTION or 3D DIGITAL		\ SURR. OFF (DSP OFF)		\
			(Back to the beginning)
			Note:
			Surround mode cannot be used when only the front speakers are connected.
			HEADPHONE	j HEADPHONE DSP
	TV
			Note:
			To use the HEADPHONE or HEADPHONE DSP mode, deactivate both of the front speakers
			(see page 13).

26