JVC rx-8010vbk manual Press MENU, Press 5 / to move to “SETTING,” then press, Also see pages

Setting the Basic Setting Items

(Also see pages 16 – 21)

1. Press MENU.

The MENU appears on the TV.

• Pressing one of the 5/ °/ 2/ 3buttons also displays the

SETTING 2 menu

“DIGITAL 1/2/3/4”: Set the digital input terminal 1/2/3/4

(see page 19).

“VIDEO DVD”:	Set the video input terminal for the
	DVD player (see page 16).
“VIDEO DBS”:	Set the video input terminal for the

MENU.

2.Press 5 / ° to move

to “SETTING,”

then press 2/ 3.

The SETTING 1 appears.

3.Press 5 / ° to move

to the item you want to set or adjust, then press 2/ 3.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press 2/ 3.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press 2 / 3.

On the SETTING 1 and 2 menus, you can do the following:

SETTING 1 menu

￿

￿

	DBS tuner (see page 16).
“LFE ATT”:	Set the low frequency effect attenuator
	level (see page 19).
“FL DISPLAY”:	Shows the disc text information on the
	display (see page 21).

Notes:

*You cannot select “CNTR DELAY” when “CTR SPK” is set to “NONE” (see page 17).

**You cannot select “REAR DELAY” when “REAR SPK” is set to “NONE” (see page 17).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

￿

“SUBWOOFER”:	Set the subwoofer information (see
	page 17).
“FRONT SPK”:	Set the front speaker information (see
	page 17).
“CENTER SPK”:	Set the center speaker information (see
	page 17).
“REAR SPK”:	Set the rear speaker information (see
	page 17).
“CNTR DELAY”:	Adjust the delay time of the center
	speaker output (see page 18). *
“REAR DELAY”:	Adjust the delay time of the rear
	speaker output (see page 18). **
“CROSSOVER”:	Set the crossover frequency
	(see page 18).

“ONE TOUCH OPR”: Set the one touch operation (see page 21).

40