Using COMMAND CENTER
Basic > Network
|
| This page allows you to make the settings that are required for network printing and |
|
| sending |
|
| General on page |
|
| You must restart this machine after you have completed these settings in order to |
|
| properly register the content of those settings in the machine. Refer to Basic > |
|
| Reset on page |
|
|
|
Item |
| Description |
|
|
|
Host Name |
| Specifies a name for the printing system network component. This name is also |
|
| used as the NetBEUI Printer Name and the SNMP sysName object. |
|
|
|
IP Address |
| Assigns the Internet Protocol address on the printing system network component. |
|
| Format of the IP Address is |
|
| 192.168.110.171. |
|
|
|
Subnet Mask |
| Specifies the subnet mask configured on the printing system network component. |
|
| If the printing system does not automatically assign a usable default value and |
|
| the first number in the IP address above is from 192 to 254, then use |
|
| 255.255.255.0 as the subnet mask. |
|
|
|
Default Gateway |
| The IP address of the gateway router for the local network. |
|
|
|
DHCP/BOOTP |
| Identifies how the machine obtains its IP configuration: DHCP/BOOTP: automatic |
|
| configuration via a BOOTP server or a DHCP server. |
|
|
|
| Basic > Time | |
|
| The current time can be set from the machine’s operation panel and, if a time server |
|
| is used to synchronize the time as well, the current time can be adjusted regularly |
|
| and easily. Enter the IP address of the time server and click the Synchronize button |
|
| to synchronize the time. |
|
| To set a time difference, click the drop down list for Local Time Adjustment and select |
|
| your region. |
|
|
|
Item |
| Description |
|
|
|
Current Local Time |
| Displays the time that is currently set in the machine. |
|
|
|
Current Universal |
| Displays the Greenwich Mean Time that is currently set in the machine. |
Time (UTC/GMT) |
|
|
|
|
|
Time Zone |
| Sets a time difference. Click the drop down list and select your region. |
|
|
|
Summer Time |
| Switches the Summer Time setting On and Off. Select On in order to have the |
|
| Summer Time function applied when the time is synchronized automatically with |
|
| a time server. |
|
|
|
Time Server |
| Enter the IP address of the time server you want to synchronize the time with. |
|
|
|
Synchronize with |
| Click the Synchronize button to synchronize the registered time with the |
Time Server now |
| designated timer server. |
|
|
|
Synchronization |
| Displays the results of the synchronization operation with the time server. |
Status |
|
|
|
|
|
ADVANCED OPERATION GUIDE |
